Esthetic Professionals Distribution - Supplies / Mill Accessories / VHF Mill Accessories / R5 Accessories / All Products

VHF - Ivotion positioning device set R5

Fri, 31 Jul 2026 09:41:40 GMT

VHF - Ivotion positioning device set R5
Buy Now: $3,300.00

Accessory set required for machining Ivotion Denture (combined tooth/prosthesis material) consisting of:
– 5 units mounting aid
– 8 dental tools 2 x P250-F1-40, 2 x P200-R1-40, 2 x P100-R1-40, 1 x U060-R2-40, 1 x U030-R2-40
– software

Visit R5 Accessories to see additional products in this category.

VHF - R5 - Pressure regulator R5 ID2 #2006

Thu, 14 Mar 2024 11:29:48 GMT

VHF - R5 - Pressure regulator R5 ID2 #2006
Buy Now: $194.00

Visit R5 Accessories to see additional products in this category.

VHF - R5 - Cooling liquid tank coupling

Mon, 4 Mar 2024 12:08:59 GMT

VHF - R5 - Cooling liquid tank coupling
Buy Now: $120.00

Visit R5 Accessories to see additional products in this category.

VHF - ET - Plastic hose 6 mm ID #1664

Mon, 21 Aug 2023 11:08:31 GMT

VHF - ET - Plastic hose 6 mm ID #1664
Buy Now: $25.00

Visit R5 Accessories to see additional products in this category.

VHF - Calibration blank 10 mm

Thu, 3 Aug 2023 11:43:47 GMT

VHF - Calibration blank 10 mm
Buy Now: $12.30

Visit R5 Accessories to see additional products in this category.

VHF Tec Powder (1ea.)

Tue, 16 Feb 2021 15:32:18 GMT

VHF Tec Powder (1ea.)
Buy Now: $10.50

CLEANING THE COOLING LIQUID SYSTEM

If the flow rate of the cooling liquid isn’t sufficient or the corresponding interval in the maintenance table has been exceeded, you must clean the cooling liquid system.

The task consist of the following automated processes:

ProcessDuration (approx.)

Cleaning - 30 minutes

Rinsing - 5 minutes

Drying (optional) - 15 minutes

NOTICE:

Material damage when cleaning the cooling liquid system incorrectly

If you clean the cooling liquid system incorrectly, the machine, blanks and tools will be damaged.

Only use Tec Powder from vhf to clean the cooling liquid system.

Carefully follow the instructions below.

Tec Powder is available from customer service.

Start DentalCNC.
Open the Maintenance section window. For this, select the following icon in the main icon bar:
Select the Cleaning the cooling liquid system maintenance task.
Confirm the current message.
The on-screen guide displays.
Confirm the opening of the working chamber door and multi-purpose compartment.
Remove the following items from the working chamber:
Any blank and holder
The tool magazine
Perform a weekly cleaning of the working chamber. See ‘Cleaning the working chamber’.
Empty and clean the cooling liquid tank.
Fill 2 l (2.1 qt) of drinking water without cooling lubricant into the tank.
Add 50 g Tec Powder to the water. Stir the water until the powder is completely dissolved.
Insert the tank into the machine.
Go to the next step of the on-screen guide. The cleaning process starts. The remaining time displays in the info area of DentalCNC‘s main application window.
Wait until the process is finished.
Empty the cooling liquid tank. Refill it with drinking water without cooling lubricant.
Insert the tank into the machine.
Go to the next step of the on-screen guide.
The rinsing process starts. The remaining time displays in the info area of DentalCNC‘s main application window.
Wait until the process is finished.
DentalCNC asks you if the machine should dry the working chamber.
Select the desired option. If selected, the drying process starts. The remaining time displays in the info area of DentalCNC‘s main application window.
Wait until the process is finished. If you didn’t select the drying process, dry the working chamber with a cloth.
Empty the cooling liquid tank.
Exchange the carbon filter. See ‘Exchanging the carbon filter’.
Thoroughly clean the cooling liquid tank.
Fill in cooling liquid for processing. See ‘Exchanging the cooling liquid and cleaning the tank’.
Insert the tool magazine into the working chamber.

Visit R5 Accessories to see additional products in this category.

VHF DESS Blank Holder

Mon, 25 Jan 2021 12:05:33 GMT

VHF DESS Blank Holder
Buy Now: $1,300.00

Visit R5 Accessories to see additional products in this category.

VHF Tec Powder (Pack of 10ea.)

Tue, 22 Dec 2020 10:43:14 GMT

VHF Tec Powder (Pack of 10ea.)
Buy Now: $69.50

Visit R5 Accessories to see additional products in this category.

VHF Tec Cooling Liquid Pro

Tue, 22 Dec 2020 09:29:03 GMT

VHF Tec Cooling Liquid Pro
Buy Now: $44.00

Visit R5 Accessories to see additional products in this category.