Esthetic Professionals Distribution - Supplies / Burs / VHF BURS / All Products

VHF - Tool magazine insert PU 1 pc.

Wed, 18 Mar 2026 12:54:46 GMT

VHF - Tool magazine insert PU 1 pc.
Buy Now: $17.50

Visit VHF BURS to see additional products in this category.

ET - Tool With 3MM Shank

Tue, 7 Nov 2023 09:53:10 GMT

ET - Tool With 3MM Shank
Buy Now: $11.73

Diameter Cutting Edge 2.8MM

Diameter Shank 3.0MM

L Cutting Edge 10.5MM

L Total 38MM With Stop Ring

Visit VHF BURS to see additional products in this category.

VHF - Air Tool - Zirconia (BLUE)

Thu, 20 Apr 2023 09:05:18 GMT

VHF - Air Tool - Zirconia (BLUE)
Buy Now: $215.29

Visit VHF BURS to see additional products in this category.

Tool magazine insert PU 5 pc.

Fri, 18 Feb 2022 13:20:13 GMT

Tool magazine insert PU 5 pc.
Buy Now: $80.50

Visit VHF BURS to see additional products in this category.

VHF - ATB - Administrative Tool Board

Mon, 8 Feb 2021 15:19:03 GMT

VHF - ATB - Administrative Tool Board
Buy Now: $235.00

Visit VHF BURS to see additional products in this category.

VHF - Milling Cutter - Glass Ceramics

Tue, 19 Jan 2021 17:17:59 GMT

VHF - Milling Cutter - Glass Ceramics
Buy Now: $79.30

Radius cutters

The dental radius cutter has a semicircular rounded tip. It is available with cutting-edge diameters of 0.3 mm to 2.0 mm. While the 2.0 mm tool is mainly used for efficient roughing, tools with a small diameter of 0.3 or 0.6 mm are mainly used for finely finishing or carving out fissures. Due to the especially long free grinding of these tools, undercuts can also be reached easily.

Depending on their field of application, the radius cutters have one to four cutting edges: for PMMA and wax, there are, for instance, extremely sharp single-tooth cutters available with a very low tendency to clog. On the other hand, the 2 mm cutters for the abrasive zirconia have three cutting edges and the CoCr cutters even have four in order to reduce the wear for each cutting edge and to ensure greater process reliability.

Grinding tools

For machining glass ceramics and composites, vhf offers torus and radius grinding tools with a diamond grit in different grain sizes. The two smaller torus grinding tools with their fine grain size are mainly used for drillings and abutments. The 2.4 mm grinding tools with their coarser grain size are used for roughing and the fine-grained radius grinding tools for the finishing process.

All tools are characterized by their good abrasion and break resistance and extremely long endurance. The diamond grit with its especially good binding to the shank avoids micro-cracks and reduces the sensitivity to thermal impact.

Cylindrical cutters

Cylindrical single tooth cutter

The cutting edge of this cutter with flat face grinding is extremely sharp and faceted. Milled edges are very smooth even at high feed rates and the risk of clogging is very low – even for plastics.

This tool is available with a cutting-edge diameter of 2.5 mm; it is exclusively used for roughing PMMA and wax. Roughing with a flat ground cutter reduces the milling time.

Cylindric double tooth cutter

A double-tooth cutter with flat face grinding and a cutting-edge diameter of 1.2 mm. It is used when 90° angles have to be milled, e.g. in drillings and abutments.

For machining non-precious alloys on a cobalt-chrome basis and titanium, this tool is available as a torus cutter with a small edge radius which protects the cutting edges (only 1.2 mm diameter) – so a higher endurance is guaranteed.

Visit VHF BURS to see additional products in this category.

VHF - Milling Cutter - CoCr and Titanium

Tue, 19 Jan 2021 17:03:28 GMT

VHF - Milling Cutter - CoCr and Titanium
Buy Now: $61.40

Visit VHF BURS to see additional products in this category.

VHF - Milling Cutter - Zirconia (Diamond Coated)

Tue, 19 Jan 2021 16:50:39 GMT

VHF - Milling Cutter - Zirconia (Diamond Coated)
Buy Now: $201.40

Radius cutters

Grinding tools

Cylindrical cutters

Cylindrical single tooth cutter

This tool is available with a cutting-edge diameter of 2.5 mm; it is exclusively used for roughing PMMA and wax. Roughing with a flat ground cutter reduces the milling time.

Cylindric double tooth cutter

A double-tooth cutter with flat face grinding and a cutting-edge diameter of 1.2 mm. It is used when 90° angles have to be milled, e.g. in drillings and abutments.

Visit VHF BURS to see additional products in this category.

VHF - Milling Cutter - Composites (Diamond Coated)

Tue, 19 Jan 2021 14:57:54 GMT

VHF - Milling Cutter - Composites (Diamond Coated)
Buy Now: $141.90

Radius cutters

Grinding tools

Cylindrical cutters

Cylindrical single tooth cutter

This tool is available with a cutting-edge diameter of 2.5 mm; it is exclusively used for roughing PMMA and wax. Roughing with a flat ground cutter reduces the milling time.

Cylindric double tooth cutter

A double-tooth cutter with flat face grinding and a cutting-edge diameter of 1.2 mm. It is used when 90° angles have to be milled, e.g. in drillings and abutments.

Visit VHF BURS to see additional products in this category.

VHF - Milling Cutter - Composites

Tue, 19 Jan 2021 14:36:26 GMT

VHF - Milling Cutter - Composites
Buy Now: $63.40

Radius cutters

Grinding tools

Cylindrical cutters

Cylindrical single tooth cutter

This tool is available with a cutting-edge diameter of 2.5 mm; it is exclusively used for roughing PMMA and wax. Roughing with a flat ground cutter reduces the milling time.

Cylindric double tooth cutter

A double-tooth cutter with flat face grinding and a cutting-edge diameter of 1.2 mm. It is used when 90° angles have to be milled, e.g. in drillings and abutments.

Visit VHF BURS to see additional products in this category.